Crews survey the damage at the scene of a coal train derailment where 27 cars came off the track near New Hazelton, spilling some coal into Mission Creek. (Emergency Management B.C. photo)

Broken axle caused New Hazelton train derailment: TSB

It could happen again without a different way to inspect trains

The CN freight train that derailed near New Hazelton — spilling coal into Mission Creek — left the track because of a broken axle.

It has happened before, and it can happen again.

That is according to a Transportation Safety Board of Canada (TSB) report released Thursday.

The TSB report concludes that the routine visual inspection could not have detected the fatigue cracks in the axle the cracked part is concealed by wheel bearing components.

The train received a certified car inspection in Prince George four days before the Jan. 19, 2018 derailment. A pull-by inspection was also performed at the last crew change in Smithers, where it left from the morning of the derailment.

“Without alternate strategies to identify fatigue cracks or to predict the likelihood of fatigue cracks developing, problematic axles might not be removed from service in a timely manner, increasing the risk of broken-axle derailments,” concludes the media release that accompanied the report.

“The Board is unaware of any safety action that has been taken as a result of this occurrence,” reads the only sentence under the heading ‘safety action taken.’

tweet

The New Hazelton derailment is not unique. The TSB report reads that from 2008-2017, there were 23 derailments on CN and Canadian Pacific Railway tracks caused by a broken axle. Nine of the axles broke like in the New Hazelton incident: near the journal fillet radius, the area between where the wheel and wheel bearing is mounted on the axle.

The TSB report could not pin down the exact cause of the 52nd of 199 cars’ axle fatigue, but did say, “fatigue cracks are known to result from abnormal cyclic loading due to a number of reasons, such as a wheel tread defect, a general out-of-roundness, or uneven loading from railcar truck components.”

The axle was manufactured in 1981 by Valdunes in France, repaired in January 2000, last maintained with the wheels in Prince George in January 2014. The report said with new wheels and roller bearings, axles can remain in service “up to or beyond 40 years…”

A request has been made with CN for comment on the report and whether the company has plans to address the axle inspection situation.

There were no injuries caused by the derailment and no dangerous goods were involved.

The three crew members — an engineer, conductor and a third member on a familiarization trip — came to a screeching stop when at about 7:18 a.m. while travelling 29 mph when there was a train-initiated emergency brake application. The crew reported no anomalies before the braking.

The B.C. Ministry of Environment and Climate Change Strategy monitored the site clean-up and recovery activities conducted by CN to ensure they met regulatory requirements. About 2,900 tons of thermal coal was dumped, with 2,800 or 97 per cent recovered. A small, unspecified amount of that spilled into Mission Creek.

Along with the 199 cars, 27 of which derailed, there were two locomotives at the head and one mid-train. The 50th to 76th cars derailed.

None of the cars were overloaded. The train weighed 28,069 tons and was 10,785 feet long, according to the TSB report.

editor@interior-news.com

@SmithersNews

 

TSB map

Eastward view of the derailed cars near New Hazelton. (Interior News file photo with TSB annotations)

Mating fracture surface from the broken axle at the L1 bearing. View toward centre of axle. (TSB photo)

Diagram of the New Hazelton CN train derailment site (TSB diagram)

Fracture surface (view towards centre of axle). The red arrows identify beach marks, and the blue pointers identify ratchet marks. (TSB photo)

Fracture surface (view towards end of axle). The red arrows identify beach marks, and the blue pointers identify ratchet marks. (TSB photo)

Just Posted

Victoria Fire Department advises cigarette safety after two fires started in one week

Two separate fires caused by cigarette butts were avoidable

VicPD faces ‘significant pressure’ following Victoria’s 2019 budget decision

Chief Const. Del Manak says council continues to micromanage his department

28 years later: Dunahee disappearance remains largest investigation in Victoria police history

The four-year old Victoria boy went missing without a trace on March 24, 1991

Saanich could become the new home of the world’s largest gnome

Galey Farms could find out Tuesday whether it will host the eight-metre-tall structure

Protective human chain forms around Victoria mosque for Friday prayer

Islanders stand arm-in-arm to show support in aftermath of New Zealand shootings

‘Families torn apart:’ Truck driver in fatal Broncos crash gets 8-year sentence

Judge Inez Cardinal told court in Melfort, Sask., that Sidhu’s remorse and guilty plea were mitigating factors

Jr. B Cougars advance to both league finals and provincials

Victoria beats Nanaimo 4-3 in Game 6 Friday night to win series

Vancouver Island motorists attempted CPR on victim in fatal Highway 4 crash

Collision took place west of Whiskey Creek; man in his 70s died

Greater Victoria Wanted List for the week of March 19

Greater Victoria Crime Stoppers is seeking the public’s help in locating the… Continue reading

POLL: When do you think the next major earthquake will hit Vancouver Island?

According to seismologists, Vancouver Island is overdue for a magnitude 7 earthquake.… Continue reading

WestJet sticking with Boeing 737 Max once planes certified to fly

WestJet had expected to add two more of the planes this year to increase its fleet to 13

B.C. driver caught going 207 km/h on motorcycle along Okanagan Highway

A motorcyclist was caught by Kelowna RCMP going 207 km/h on Highway 97C

Motorcyclist dies after three-vehicle crash on old Island Highway

Accident happened at 12:15 p.m. Friday near Country Club Centre in Nanaimo

Most Read